Skip to Store Area:

Blue Moon Press, Ltd.

You're currently on:

Front Cover

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Build Your Own Hydraulic Forging Press

Batson, James

Availability: In stock.

$30.00

Quick Overview

This book and drawings are designed to help you build your own 24 ton Hydraulic Forging Press. A two horsepower 220 volt single phase motor running at 1725 RPM powers a 5.5 gallon per minute "Hi-Lo" hydraulic pump. Ram force of 24 tons is applied by a 5" diameter double acting hydraulic cylinder at 2500 psi pressure. The movement of the ram die is controlled by a 4 way, 3 position hydraulic valve. The length of the ram stroke is 8". The maximum speed of the ram is 1.1 inches per second. The ram speed can be doubled by using a 5 horsepower electric motot running at 3600 RPM.

A section is included which will enable you to alter a Log Splitter for use as a Forging Press.

Format: Soft cover;  Dimentions: 8 1/2" x 11";  Pages: 46;  Illustrations: 35.



 

Author Batson, James
Publisher Batson Engeneerng and Metalworks
ISBN 000
Format Hardcover